Soleusair FT1-30-42 User Manual download pdf (Page 3)

This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit

situation. If the fuse blows, unplug the product from the outlet. Replace the fuse per the instructions

below and check the product. If the replacement fuse blows, a short-circuit may be present and the

product should be discarded or returned to an authorized service facility for examination and/or

repair.

HOW TO REPLACE THE FUSE

1. Unplug the fan from the outlet. Place the plug on a firm, flat surface.

Open the fuse cover, located on the top of the plug, using your thumb

or a flathead screwdriver to slide the over towards the prongs.

NOTE: Ensure that the fuse cover is completely open before attempting

to remove the fuse.

2. Remove the fuse carefully by using a small screwdriver to pry the fuse

out of the compartment by the metal ends of the fuse.

3. Risk of fire. Insert a new 5 Amp, 125 Volt fuse into the fuse compart-

ment, making sure that the fuse is securely in place.

4. Slide the fuse cover closed completely. If the fuse cover is difficult to

close, make sure the fuse is properly secured in place by pressing

down on the metal ends of the fuse.

CAUTION: Risk of fire. Do not replace the attachment plug. It contains a

safety device (fuse) that should not be removed. Do not use the product if

the attachment plug is damaged.

To avoid a risk of fire, only replace with a 5 Amp, 125 Volt fuse.

To order a new fuse, contact Soleus Air at: (888)-876-5387

1 2 3 4 5 6 7 8 9

No comments

Soleusair FT1-30-42 User Manual Page 3